Ethan BrooksBy Ethan Brooks

Updated November 2026

The XM 365 Infinity power rack is a steel rack built for home lifters who want squat, bench, and pull-up capacity in a footprint that fits a garage or spare room. It suits lifters who plan to add accessories over time, but buyers should confirm the included hardware, ceiling height, and floor space before ordering. Read the manufacturer’s listed dimensions and weight limits, since those vary by configuration.

Why the XM 365 Infinity Power Rack Gets Mixed Reactions

Owners of the XM 365 Infinity power rack often report that the frame feels solid once bolted down and that the included pin and safety hardware covers basic lifts. Complaints tend to center on assembly time and on the difference between what the listing shows and what arrives in the box. Accessories such as a pull-up bar, dip attachment, or landmine may be sold separately, so a buyer expecting a fully outfitted rack can be disappointed.

Shopping for one? See our guide: Home Gym with Power Rack: 5 Best Picks Compared (2026).

Factors That Affect Whether It Fits Your Setup

Three things decide whether this rack works for you: space, floor surface, and the accessories you plan to use.

  • Ceiling height: Measure from the floor to the lowest obstruction, such as a light fixture or joist. Add the barbell’s length in the racked position, plus several inches for clearance when you press overhead.
  • Footprint: Tape out the rack’s base on the floor and leave room to step around it, load plates, and get on and off the bench.
  • Floor: A bare concrete slab is fine, but rubber horse stall mats or interlocking gym tiles protect both the floor and the rack’s feet from movement.
  • Accessories: Confirm the attachment points you need. A rack that lacks a pull-up bar or dip station will limit your programming unless you buy those pieces separately.

What to Do Before You Buy or Assemble

  1. Measure ceiling height and floor area against the manufacturer’s listed dimensions.
  2. Compare the parts list against the box contents on delivery, and report missing hardware before you start assembly.
  3. Assemble on a flat surface, and tighten every bolt in stages rather than fully tightening one corner first.
  4. Anchor the rack to the floor or wall if the manufacturer recommends it, especially if you plan heavy squats or pressing near the uprights.
  5. Test the safety pins and J-hooks with an empty bar before loading plates.

What We’d Use

A rubber gym mat is a sensible first purchase for protecting the floor under the rack: View on Amazon.

A standard Olympic barbell pairs well with any power rack and fits the J-hooks on most frames: View on Amazon.

FAQ

Is the XM 365 Infinity power rack good for beginners?

It can be, provided you have the space and are comfortable following assembly instructions. Beginners should learn proper squat and bench setup with the safety pins set just below the lift’s bottom point.

Does the XM 365 Infinity power rack need to be bolted to the floor?

Check the manufacturer’s instructions. Anchoring is a good idea for heavy loads, but confirm what the product documentation recommends before drilling into any surface.

Should I compare the XM 365 Infinity with other racks first?

Yes. Reading comparisons such as Power Rack vs Power Cage (2026): Which Is Better for Your Home Gym? can help you decide whether a full cage or a freestanding rack suits your training and space.

Ready to choose one?

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our budget home gym equipment guides, checking product details against manufacturer specifications and owner feedback.