Updated November 2026
Metered rack power distribution units let you see how much current each rack is pulling, so you can avoid overloaded circuits and plan capacity before something trips. When comparing metered rack power distribution units, this list weighs outlet count and type, input voltage and breaker rating, mounting format, surge protection, and how clearly the metering is displayed. Product listings and owner feedback patterns guided the selection.
Our top picks at a glance
- 1
TOP CHOICEBest overallStarTech 8-Outlet 1U Metered PDU, Surge, TAAView on Amazon - 2
Best for high-amperage circuitsAPC AP8858 Power Distribution UnitView on Amazon - 3
Best for heavy-load 30A installsMetered-Surge Protection Power Distribution Unit, 30AView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| StarTech 8-Outlet 1U Metered PDU | Small server racks | 1U, 125V 15A, surge protection |
| APC AP8858 Power Distribution Unit | Higher-amperage circuits | 20A rating, 50/60 Hz |
| Metered-Surge Protection Power Distribution Unit, 30A | Heavy-load installs | 30A, 240V, mixed C13/C19 outlets |
StarTech 8-Outlet 1U Metered PDU, Surge, TAA
Horizontal rack mount metered power distribution unit, Server strip, 125V 15A breaker, 8ft (2.4m) cable, MOV surge StarTech 8-Outlet 1U Metered PDU, Surge, TAA (8NM8-RACK-MOUNT-PDU)
Best for: Small server racks and home lab setups that need metering in a compact footprint.
This unit suits anyone running a few network appliances or a modest server who wants per-rack load visibility without a large chassis.
Pros
- Single 1U height leaves room for other rack gear.
- Built-in metering and surge protection in one unit.
Cons
- Standard 125V 15A rating limits total draw.
APC AP8858 Power Distribution Unit
Best for: Higher-amperage circuits where the rack draws more than a standard 15A outlet can comfortably supply.
Suited to users who need a 20A-rated distribution unit and are comfortable matching it to the correct circuit and receptacle.
Pros
- 20A rating covers heavier equipment loads.
- Well-known brand with broad rack compatibility.
Cons
- Owners often report it needs a matching 20A circuit and plug.
Metered-Surge Protection Power Distribution Unit, 30A
Metered-Surge Protection Power Distribution Unit, 240V, L6-30P Plug, 30A, 7200watts, (6) C13 & (2) C19 Outlets, Networking, Server Rack, Heavy Industry, Crypto Mining PDU
Best for: Heavy-load installs on 240V circuits with an L6-30P plug and mixed outlet types.
Best matched to dedicated circuits serving dense equipment, where the listing specifies 7200 watts and a mix of C13 and C19 outlets.
Pros
- 30A, 240V capacity suits dense equipment.
- Six C13 and two C19 outlets accommodate varied devices.
Cons
- Requires a 240V L6-30 receptacle, which many home spaces lack.
Buying Guide
Check your input voltage and breaker rating
Match the unit’s rated voltage and amperage to the circuit it will plug into. Manufacturers specify these limits, and exceeding them risks tripped breakers or overheating.
Count outlets and confirm connector types
Add up the power draw of every device and confirm you have enough C13 or C19 outlets. Mismatched connectors are a common reason a purchase goes unused.
Decide how you want to read the metering
Some units show load on a local display, while others report to a network interface. Choose based on whether you check load at the rack or monitor it remotely.
Plan the mounting and cable routing
Measure rack depth and confirm the unit’s cord length reaches the wall receptacle without strain. A 1U or 2U format keeps more space free for equipment.
Good picks for this: StarTech 8-Outlet 1U Metered PDU and APC AP8858 Power Distribution Unit
FAQ
What does a metered PDU measure?
It reports current draw, typically per unit or per outlet group, so you can see how close a circuit is to its limit.
Do I need a 240V unit at home?
Only if your equipment requires it and you have a matching 240V receptacle. Most small racks run fine on standard 120V circuits.
Is a surge-protected PDU necessary?
It adds protection against voltage spikes, which is useful for sensitive electronics. Confirm the unit’s surge specifications in the listing.
Conclusion
The StarTech 8-Outlet 1U Metered PDU suits small racks that need compact metering. The APC AP8858 fits circuits rated for 20A, and the 30A metered-surge unit serves heavy 240V installs. Confirm your circuit before buying, and consult a licensed electrician for any new high-amperage wiring.
Sources
- workplace electrical safety guidance and circuit-related hazards (osha.gov)
- electrical installation standards, including the National Electrical Code (nfpa.org)
- measurement and power-quality reference material (nist.gov)
